FLOE Sectional Docks
What makes FLOE sectional docks superior to other brands?
FLOE Sectional Docks have a sturdy, lightweight design with fast and easy assembly and breakdown with no tools required. Once the legs are removed, they store in limited space on your shoreline in the offseason. All sectional docks have FLOE’s Easy-Level™ leg system with top-side leveling. Sectional docks are available in two styles: Standard and Quick-Attach™. Quick Attach™ lets you easily attach accessories anywhere along the dockside without drilling holes.
Easy-Level™ Leveling System
Floe’s rust-resistant, flush mounted Easy-Level™ System lets you adjust your dock from the top side without getting in the water! All that’s needed is a cordless drill or FLOE’s leveling tool. For a clean, smooth appearance, the adjustment hole is neatly topped off with a flat plastic cap.
Quick-Connects™ Make Life a Breeze
FLOE’S trademarked Quick-Connect™ system allows for effortless connections and endless configurations! Since no hard bolting is used, dock sections can be simply moved or added to adjust to your ever-changing needs creating a truly modular dock.
Braced Easy-Level™ Support Leg Kits
FLOE sectional docks use a bracing system that eliminates unsafe sway providing a safe and stable dock for endless hours of lake enjoyment. Best of all, no tools are needed to attach or remove the braces or legs! Simply pull the spring pin from the brace, turn the knob and the leg with brace slides right out. Then you can easily stack the docks in limited space on your shoreline.
FLOE’s Sectional dock legs work in water depths up to 82″ .
SECTIONAL DOCK COMPONENTS
FLOE’s sectional docks are solid to walk on and break down quickly with no tools. They are a great solution for shorelines with steep hills where traditional roll-in docks aren’t suitable and where there is limited shoreline space for off-season storage. The custom extruded frame gives high strength with low weight. FLOE uses corrosion-resistant stainless steel and aluminum fasteners. Sectional aluminum dock sections are available in 4′ widths and 8′, 10′ or 12′ lengths.
Quick-Connects™ make it easy to customize the dock to your needs. Create a slip for your boat and sundeck area for lounging. If you don’t like the sundeck on the left side, easily move it over to the right. The configurations are endless and easy with a FLOE dock.
SHORE-END DOCK SECTION
The Quick-Connects™ enable you to pivot the first modular dock section to contour to your shoreline acting as a shore end ramp.
SHORE-END DOCK RAMPS
The perfect approach to your dock, as well as the most cost-effective way to add length. The shore-end ramp attaches using a Quick Attach bracket and FLOE’s exclusive dock hook. It pivots up and down and easily detaches for seasonal storage.
DOCK SIZES AND SAMPLE LAYOUTS
Add aluminum dock sections and components as your needs grow or your budget allows. FLOE has a variety of standard components to choose from to design your system. The systems you can create with FLOE’s modular dock sections are truly endless.
DOCK STORAGE AND REMOVAL
Off-season storage is simple with sectional docks.
FLOE’s sectional leg kits can be removed in seconds with no tools. Follow these simple steps:
1. Remove the spring pin from the brace
2. Turn the knob to loosen the leg
3. Slide the leg out
Sections store in minimal space
Aluminum Dock Decking
FLOE’s most popular decking! Maintenance-free aluminum decking has a long-lasting, baked on, anti-skid surface. The light-grey hue and open, ribbed underside allows air to move freely and cool the dock surface. The aluminum also assists in keeping the deck cool by conducting and transferring the water temperature to the deck.
It’s the kind of timing only Murphy’s law loves. As Aitkin High School’s tech department began ramping up production of face shields for local health care providers – using the school’s 3D printer – the printer decided to stop working. However, thanks to the generosity of Mille Lacs Energy Cooperative, the school expects to be...
Republished from The Aitkin Age Wednesday, May 22, 2019 Shawn Hagen, manufacturing engineer for FLOE International, Inc. in McGregor is logging some miles between FLOE and Aitkin High School (AHS) this year. Instructor Erik Heimark is teaching Advanced Metals and Manufacturing in a well-equipped industrial arts shop at the school. Under the watchful eyes of Heimark...
Republished from The Voyageur Press Wednesday, Feb 26 2019 Congressman Pete Stauber (Minnesota 8th District) visited FLOE International in McGregor, Minnesota this past week. The newly elected congressman campaigned on and believes strongly in small businesses.Congressman Stauber noted that he is serving on the Small Business/Contracting and Infrastructure Committee and is committed to supporting the efforts...