FLOE Roll-In Docks

Dock Structure

 

The Bridge-Type Truss design of FLOE’s Roll-In docks provide the highest strength-to-weight ratio available. A clean, sharp appearance is achieved by welding the webbing to the inside of the dock. Waves flow through this open design rather than pound against it.  Life at the lake just became that much better.

Easy-Level Leveling System

Floe’s rust-resistant, flush mounted Easy-Level™ System allows top side leveling of the lake dock without ever entering the water! All that’s needed is a cordless drill or FLOE’s leveling tool. For a clean, smooth appearance, the adjustment hole is neatly topped off with a flat plastic cap.

Quick-Connects™ and Easy-Level™ Wheel Kits Make Life a Breeze

FLOE’S trademarked Quick-Connects™ and Easy-Level™ Wheel Kits allow for effortless connections and endless boat dock configurations! Because there is no hard bolting, dock sections can be simply moved or added-on to enabling you to adjust to ever-changing needs and customization.

Double Braced Easy-Level™ Support Legs

Enjoying lake life is so much simpler and more enjoyable with a safe and solid dock surface. FLOE’s Double Braced Easy-Level™ support legs eliminate unsafe dock sway and provide unrivaled stability. Walking on the lake dock feels like taking a stroll on a permanently built pier.

FLOE’s Double Braced Easy-Level™ Wheel Kits are available in sizes that can safely accommodate water depths up to 8 1/2 feet, providing safe and secure water recreation from nearly any shoreline formation.

Wheel and Sand Pad Choices

 

FLOE roll-In dock legs have two options:  Sand Pads or Wheels which make it easy to seasonally install and remove docks.

A drilled wheel works best in firm to moderately soft applications. The drilled wheel  fills with water for ballast. An airtight wheel can be used in dense mud applications where the anticipated settling will be greater than 4”. The mud wheel is not drilled and adds buoyancy to ease both installation and removal of your roll-in dock.  

Imagine installing or removing a dock with just one person! Each section of the FLOE dock is equipped with high density polymer wheels so you lift less than half the weight of just one section no matter the length of the dock! Let the good times roll!

Sand pads are used for installations where portability is not a concern.

Jump to a section on this page:
Dock Sections and Components |  Sample Layouts |  Storage and Removal  |  Decking Choices  |  Accessories  |  Find a Dealer  | Docks News

Use this icon in the bottom right to return to the top: Icon for return top of page.

DOCK SECTIONS AND COMPONENTS

FLOE roll-in dock sections are built to last. Custom extruded aluminum and innovative engineering go hand-in-hand to provide our customers with benefits that are unmatched in the industry. Structural components and FLOE accessories are made from custom extruded aluminum. FLOE uses corrosion-resistant stainless steel and aluminum fasteners. Roll-in modular dock sections are available in 8′, 10′, 12′ and 16′ lengths and 2′, 4′ and 6′ widths. FLOE’s maintenance-free aluminum dock systems are manufactured to provide you with a long lasting, trouble-free investment. It may just be the last lake dock you ever buy!

SUNDECKS

FLOE roll-in sundecks offer you a spacious way to enjoy your time on the water. Many sizes are available to accommodate your needs. A 4′ x 8′ deck can be used on the side of a straight dock section to create an 8′ x 8′ sundeck. An 8′ x 8′ sundeck can be used on the side of a straight dock section to create an 8′ x 12′ sundeck. An 8′ x 12′ and 8′ x 16′ sundeck can be used either at the end of a straight dock section or off the side.

SHORE-END DOCK RAMPS

Shore end ramp component for Roll-In docks.

The perfect approach to your dock, as well as the most cost effective way to add length. The shore-end ramp attaches using our exclusive dock hook. It pivots up and down and easily detaches for seasonal storage.

SHOREWAY RAMPS

The roll-in shoreway ramp has a bridge truss structure to match your other aluminum dock sections and can be used with or without wheel kits. With wheels, it can be independently adjusted and moved around like other sections. Without wheels, it can be set onto the main dock for seasonal storage in small spots. A complete 28′ or 32′ dock system needs only 4′ by 16′ of space for storage.

DOCK WEDGES

Increases your deck space while making an attractive, safe corner. They also make a great spot to attach a bench or ladder. Roll-in wedges come in 2′, 4′ and 6′ widths.

DOCK SIZES AND SAMPLE LAYOUTS

Add aluminum dock sections and components as your needs grow or your budget allows! FLOE has a variety of standard components from which you can pick and choose to design your lake dock system. The systems you can create with FLOE’s modular dock sections are truly endless.  You can create platforms for sunning and entertaining friends or a great pontoon boat dock.

Roll-In Dock sample sections and sun decks.
Roll-In Dock sample wedges and ramps.

Dock Sections/Sundecks
These roll-in sections can be used for going straight out as well as making “L” shapes, slips or sundecks. Placing two 4′ x 12′ or 4′ x 16′ sections side by side gives you an excellent option for a double-wide sundeck that can be handled as two independent sections during installation and removal.

Sundecks
A 4′ x 8′ sundeck can be used on the side of a straight section to create an 8′ x 8′ sundeck. An 8′ x 8′ section used on the side of a straight section creates an 8′ x 12′ sundeck. 8′ x 12′ and 8′ x 16′ sections can be used either at the end of a straight section or off to the side to create a sundeck.

Wedges
Make that perfect corner while adding safety and beauty to your system.

Shore End Ramps
Adjustable, pivoting shore-end ramps give you the ultimate approach and additional length for less money.

Truss Style Ramps
Provides the flexibility of a shore end ramp with the look of a roll-in dock section. Can be used with or without wheel kits.

STORAGE AND REMOVAL

OFF-SEASON STORAGE MADE SIMPLE, EVEN ON A HILL

Storing a Roll-In dock.

FLOE’s innovative, modular design gives you versatility not available on any other dock. Off-season storage is made simple by giving you the best of both worlds. You get the ease and user-friendly benefits of a roll-in dock combined with the compact storage benefits of a sectional product.

Storing a Roll-In dock.

DISCONNECTED

FLOE’s Quick-Connect™ System allows dock sections to come apart quickly for off-season storage. They can be stored side-by-side (as shown above) or they can be nested for more compact storage.

CONNECTED

Dock sections can easily be pulled out and stored while still connected for quick and easy installation next spring.

Storing a Roll-In dock.
Storing a Roll-In dock.
Storing a Roll-In dock.

LARGE SYSTEM? NO PROBLEM!

Large systems can be easily broken down into the modular parts and stored in a small area out of sight.

DECKING CHOICES

Aluminum dock decking.

Aluminum Dock Decking

FLOE’s most popular decking! Maintenance-free aluminum decking has a long-lasting, baked on, anti-skid surface. The light-grey hue and open, ribbed underside allows air to move freely and cool the dock surface. The aluminum also assists in keeping the deck cool by conducting and transferring the water temperature to the deck.

Aluma-Grain™ Dock Decking

Cutting edge paint application technology has allowed us to create a maintenance-free aluminum decking with the look of real wood. This patented powder coating process combines the aesthetics of real wood with all of the great features of our standard aluminum decking.

Additional Decking Options Available

Custom decking options are available for custom order installations or for larger residential and commercial applications.
These include Carpet Dock Decking and Cedar Dock Decking options.
Contact a FLOE docks dealer to get more information on these options.

Where can you find FLOE?

 

Use our Dealer Locator to find FLOE products near you.

Students gain real-life manufacturing experience through FLOE partnership

Republished from The Aitkin Age Wednesday, May 22, 2019 Shawn Hagen, manufacturing engineer for FLOE International, Inc. in McGregor is logging some miles between FLOE and Aitkin High School (AHS) this year. Instructor Erik Heimark is teaching Advanced Metals and Manufacturing in a well-equipped industrial arts shop at the school. Under the watchful eyes of Heimark...

READ MORE
Congressman Pete Stauber Visits FLOE

Republished from The Voyageur Press Wednesday, Feb 26 2019 Congressman Pete Stauber (Minnesota 8th District) visited FLOE International in McGregor, Minnesota this past week. The newly elected congressman campaigned on and believes strongly in small businesses.Congressman Stauber noted that he is serving on the Small Business/Contracting and Infrastructure Committee and is committed to supporting the efforts...

READ MORE
Gaining Traction at FLOE

Republished from The Aitkin Age Friday, March 29 2019 Progress. A company doesn’t thrive for 36 years without it. FLOE International, based out of McGregor, is a prime example. The company was literally built from the ground up by founder and CEO Wayne Floe. He continues to drive the company forward as a visionary entrepreneur who...

READ MORE
FLOE Products are sold through a professional dealer network across the US and Canada. To find your local dealer click on 'Find a Dealer' at the top of the page.