FLOE’s dock furniture includes 2 sturdy swivel/rocking chairs with foot rest and aluminum table with umbrella hole (umbrella not included). This furniture – with its maintenance-free sling fabric and aluminum frame – is great for entertaining and relaxing on the water. Styles and colors of chairs may vary.
Benches attach anywhere on the dock and come standard with two arm rests with cup holders. Available in Aluma-Grain™ and grey finish.
FISHING ROD HOLDER
The fishing rod holder simply slides into the channel on a FLOE vertical bumper.
Extra-long vertical grab handles give you leverage for easy dock access without taking up dock space. FLOE swim ladders attach anywhere on the dock. Available in 58″ & 70″ heights.
Dock steps make it as easy to get out of the lake as it is to jump in. The steps have an all aluminum construction for a lightweight, long-lasting addition to your dock. The accordion style design is offered in three sizes: a four step, a six step and an eight step. These steps will accommodate water depths up to 74″. The extra deep 12″ steps and standard handrail make this a great solution for lake users of any age. Available for stationary and roll-in docks.
The ultimate way to keep scratches off your prized possessions. Available in 30″ and 40″ heights. Recommended every 4′ to 6′ where boats will be parked and for use on corners. Bumpers attach anywhere and have infinite vertical adjustment. Vertical bumpers are available in aluminum or with FLOE’s exclusive Aluma-Grain™ finish.
PREMIUM CORNER BUMPER
Rivets to the dock frame and protects the dock from all sides.
Soft PVC floating dock corner bumper rivets to deck surface and protects your watercraft from the corner of the dock.
Heavy duty aluminum cleats are perfect for tying off your boat. Two styles available – one that mounts to the frame of the dock and one that side mounts using a bracket.
Bumper edging works great along the dock edge and as a bow protector when entering a slip. Bumpers are sold in sets of two 10’ lengths and work for roll-in, stationary and floating docks.
Handrails add safety, ease and access to your dock system. 42” high aluminum safety handrails are extra sturdy and have clean, rounded radial corners. Handrails come in 4′, 6′, 8′ and 12′ lengths.
SHORE END WHEEL
Eliminates lifting and makes installation and removal easier then ever! Wheels can be turned to the inside or outside depending on application. If the dock height will be set higher or lower than 8″ off the water, add or subtract this number when determining wheel kit sizes.
Available only for roll-in docks.
Level your dock without getting wet! 4.5’ tall speed-wrench makes leveling your dock a breeze.
Available for roll-in and stationary docks. FLOE’s support posts with mounting brackets are available in 2 1/2′, 4′, 6′, 8′ and 10′ lengths. Mainly used for shore-end support. Posts can also be used on sundecks in some situations.
Telescoping pole raises and lowers in seconds with infinite adjustment. Aluminum pole goes through a mounted bracket and augers to the lake bottom. Includes globe and solar light that shines down on the flag. 3’x5′ flag sold separately.
Many lake shores have seawalls where shore end ramps are not ideal. The seawall attachment connects a dock section directly to the seawall.
Support bars with PVC tubes makes it easy for one person to pull the canoe onto the rack. The adjustable support poles allow the rack to be placed in water depths up to 42″.
LAKE ACCESSORY RACK
Single and double tier for holding kayaks, paddle boards and other lake accessories.
Heavy duty bungee is connected to each bar to hold items in place.
• 35 lb. weight max. per arm.
• 35 lb. weight capacity per arm.
• Add-on arms available.
LAKE ACCESSORY CART
Adjustable bars to accommodate kayaks, paddle boards and lily pads. The 2” coupler makes for easy transporting of accessories to storage areas.
• 35 lb. weight max. per arm.
Republished from The Aitkin Age Wednesday, May 22, 2019 Shawn Hagen, manufacturing engineer for FLOE International, Inc. in McGregor is logging some miles between FLOE and Aitkin High School (AHS) this year. Instructor Erik Heimark is teaching Advanced Metals and Manufacturing in a well-equipped industrial arts shop at the school. Under the watchful eyes of Heimark...
Republished from The Voyageur Press Wednesday, Feb 26 2019 Congressman Pete Stauber (Minnesota 8th District) visited FLOE International in McGregor, Minnesota this past week. The newly elected congressman campaigned on and believes strongly in small businesses.Congressman Stauber noted that he is serving on the Small Business/Contracting and Infrastructure Committee and is committed to supporting the efforts...
Republished from The Aitkin Age Friday, March 29 2019 Progress. A company doesn’t thrive for 36 years without it. FLOE International, based out of McGregor, is a prime example. The company was literally built from the ground up by founder and CEO Wayne Floe. He continues to drive the company forward as a visionary entrepreneur who...