FLOE BOAT LIFT CANOPIES
FLOE boat lift canopies offer greater boat protection with their extra deep fabric and framework. Your canopy will not blow in or up and will keep your boat fully covered. The upscale style with tailor-fit fabric has a refined look and is held taut with the exclusive Quick-Clip™ fabric attachment system.
FLOE uses a premium-grade solution dyed fabric that is water resistant, has a more luxurious look and weighs 50% less than comparable vinyl fabrics for easy removal and installation. The SDP fabric is urethane coated, UV protected and has rip-resistant technology. In addition to the durable construction, the full-length seams are heat sealed to minimize leaks.
FLOE offers a variety of canopy lengths and widths to accommodate different watercraft sizes. The canopy frames adjust vertically and horizontally for perfect boat coverage.
Maxis™ Canopies – Easy access to your lift with the touch of a button!
The Maxis™ Canopy has 32″ of additional side coverage over standard canopy fabrics providing even more protection for your boat. With the push of a button, your canopy frame tilts up allowing easy access for boats with towers and bimini tops. Mesh ends allow air to flow through the canopy.
MAXIS™ CANOPY COLOR OPTIONS – Click for larger image
(Custom colors also available. Style and colors subject to change.)
Sidewall height including the canopy frame rail to the bend in the hoop: 48.188”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 61.125”
Inside width: 137”
Standard Canopies
Color choices available in Navy Blue, Green and Grey (actual colors will vary from web colors)
Mesh End Options
For high wind applications.
Sidewall height including the canopy frame rail to the bend in the hoop: 17.3125”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 21.125”
Inside width: 115”
Sidewall height including the canopy frame rail to the bend in the hoop: 17.3125”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 21.125”
Inside width: 121”
Sidewall height including the canopy frame rail to the bend in the hoop: 17.3125”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 21.125”
Inside width: 137”
Sidewall height including the canopy frame rail to the bend in the hoop: 17.3125”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 21.125”
Inside width: 125”
Sidewall height including the canopy frame rail to the bend in the hoop: 17.3125”
How far the valance hangs below the frame rail: Approximately 4”
Pitch/angle from the sidewall to the peak: 5 Degrees
The overall height from the peak to the bottom of the canopy rail: 21.125”
Inside width: 137”
Free-Standing Canopies
Color choices available in Navy Blue, Green and Grey.
Inside width is 119” and accommodates all sizes of 10.5’ canopies (canopies sold separately).
Must anchor when installing.
Canopy Frame Weight: 164lbs
Canopy Stand Weight: 211lbs
Combined Weight (Frame + Stand): 375lbs
For quick access to content, click on category below:
Maxis Canopies | Standard Canopies | Free-Standing Canopies | Quick Clips | Extensions
Use this icon in the bottom right to return to the top: 
Quick Clip™ and Elastic Tension-Belt™ Systems
All of FLOE’s canopy systems incorporate the Quick-Clip™ System with ergonomic finger grips allowing you to install and remove your canopy fabric in half the time of other systems. The exclusive Elastic Tension-Belt™ design provides constant tension on the fabric for a taut look and stunning aesthetics.
Canopy Extensions make FLOE’s extra deep canopy even deeper
FLOE’s canopy extensions give you extra clearance so you can bring boats with towers and pontoons with bimini covers into your boat lift without having to fold anything down. Canopy extension kits add an additional 18″ of side coverage over standard canopies and are available in all of our popular SDP fabric colors. Canopy extensions require that the lift be anchored.
Canopy extensions use sturdy fully adjustable aluminum frames that bolt to the bottom of the main canopy rails to support the extra fabric.
Republished from Boating Magazine. LOA: 22'6" | Beam: 8'6" | Dry Weight: 4,870 lb. | Seat/Weight Capacity: 13/1,943 lb. | Fuel Capacity: 40 gal. | Available Power: Mercury MerCruiser 6200 The Varatti Z22 has you covered whether you surf, ski or wakeboard. Surf, ski, wakeboard? Whatever your watersport of choice, or even if you want to do all three, the new Varatti Z22 from Floe International...
CLICK ABOVE TO WATCH VIDEO
Republished from Boating Magazine. By Pamela A. Keene For several days on Lake Lanier earlier this summer, there was a new kid in town. Floe International brought its newest model – Afina – to the lake to showcase the leading-edge technology behind this hybrid cruiser-pontoon. “Afina takes pontoons to the next level,” said Wayne Floe...
FLOE Products are sold through a professional dealer network across the US and Canada. To find your local dealer click on 'Find a Dealer' at the top of the page.
